Zünd D3 Cutter

Description

Two beams, twice the performance

With its innovative dual-beam system, the D3 sets new standards in performance. The two beams can each be equipped with up to three different modules, instantly doubling the throughput. The cutter controller optimally allocates the jobs to each of the two beams, ensuring maximum productivity.

D3 Information
L Width (in mm) 1800 x Length (in mm) 3200
XL Width (in mm) 2270 x Length (in mm) 3200
2XL Width (in mm) 2740 x Length (in mm) 3200
3XL Width (in mm) 3210 x Length (in mm) 3200
Reliable and productive – high-performance modules for every application
Find the perfect module & tool for every application.

Creasing Tool Type 1 – CTT1
The CTT1 is perfect for processing single-wall corrugated board. The tool accommodates crease wheels with a diameter of 61 mm/2.4 in and a width of 20 mm/.8 in. Fully supported by the cutter software, the tool produces high-quality creases both with and against the corrugation without tearing or cracking the top sheet. The crease wheels simply snap into the holder, making them very easy to insert and replace.

Creasing Tool Type 2 – CTT2
The CTT2 is a universally applicable crease tool. Accommodates a wide range of crease wheels for folding carton, polypropylene, twin wall sheets, etc.

Creasing Tool Type 3 – CTT3
The CTT3 is designed for creasing double- and triple-wall corrugated board. Accommodates crease wheels with a diameter of 90 mm/3.5 in and a width of 28 mm/1.1 in. The tool produces high-quality creases both with and against the corrugation without tearing or cracking the top sheet. The crease wheels simply snap into the holder, making them very easy to insert and replace.

Driven Rotary Tool – DRT
The Driven Rotary Tool is designed for cutting all manner of textiles reliably and economically. The material is cut with a motor-driven ten-segmented blade. The blade geometry reduces the drag force on the material considerably and also helps cleanly sever thread or fiber. This processing method produces clean, precise cuts even on very loose, coarsely knit materials.

Choice of two RPM setting depending on the application. Also suitable for cutting materials with low melting points.

Board Handling System – BHS150
Industrial-level manufacturing using highly automated production lines – with the BHS150 Board Handling System, you can produce around the clock while keeping personnel requirements to a minimum. The combination of 1.5 m stack height, high production speeds, and extremely short set-up times leads to considerable increases in productivity and profitability.

Board Handling System – BHS
With the unique combination of automated material handling and high-performance digital cutting, you can extend production beyond normal business hours. Personnel requirements are limited to loading and unloading the stacked pallets.

Roll-off units
Zünd has a great deal of experience in material-handling solutions for flexible rolled materials. Our product range offers the perfect roll-off device for your cutting system, no matter how challenging the rolled material may be.

Center winder
Thanks to its robust construction and drive system, the Center Winder can handle rolls up to 100kg/220 lbs, both for unwinding and rewinding. Well-designed mechanics ensure consistent material tension. Fabrics can be fed onto the cutting system without creases or distortions.

For even more information about the Zund D3 machine please visit the manufacturer’s website

www.zund.com

The new standard in productivity
Two beams for maximum productivity: The D3 sets new performance standards with its innovative dual-beam system. The two beams can each be equipped with up to three different modules, potentially doubling the throughput in one fell swoop. The intelligent cutter controller optimally allocates the jobs to each of the two beams, ensuring top productivity. With its powerful, rugged design, the D3 lives up to its true potential in industrial environments.

Precision at the highest level
The D3 is a precision machine. From innovative drive system to blade, all components are perfectly coordinated. Produce your jobs at the highest quality level, economically and efficiently. Your customers will be impressed with the results.

Excellent price-performance ratio
The price-performance ratio of the D3 series is excellent. We use only the most modern technologies and top-quality components. The flexibility, reliability, and quality of the digital cutter cannot be matched by any competitor.

Modular design for maximum flexibility
The extraordinary modularity of our cutting solutions is truly unique. You can always make your D3 adapt to new requirements with modifications and upgrades. Define which functions your cutting solution has to perform and make your cutting system adapt to new requirements with modifications and upgrades. Zünd’s tried and tested modular tool system is available on both beams of the D3.